Arptech Rapid Prototyping Materials comparison & Specifications
:: Arptech- RP Material Comparison :: | Material Home | RP Service comparison | :: Back Home ::
 
 Tensile Strength
FDM (ABS)   35 Mpa
SLA (SL7560)   55 Mpa
SLA (SL5510)   77 Mpa
SLS (PA)   44 Mpa
SLS (GF)   38 Mpa
3DP (P1500)   19 Mpa
   Tensile Modulus
FDM (ABS)   2480 Mpa
SLA (SL7560)   2500 Mpa
SLA (SL5510)   3296 Mpa
SLS (PA)   1600 Mpa
SLS (GF)   5910 Mpa
3DP (P1500)   827 Mpa
   Flexural Modulus
FDM (ABS)   2618 Mpa
SLA (SL7560)   2500 Mpa
SLA (SL5510)   3054 Mpa
SLS (PA)   1285 Mpa
SLS (GF)   3300 Mpa
3DP (P1500)   827 Mpa
   Impact Strength - Notched Izod
FDM (ABS)   107 J/m
SLA (SL7560)   36 J/m
SLA (SL5510)   27 J/m
SLS (PA)   214 J/m
SLS (GF)   96 J/m
3DP (P1500)   32 J/m
   Hardness (Shore D)
FDM (ABS)   78 D
SLA (SL7560)   86 D
SLA (SL5510)   86 D
SLS (PA)   75 D
3DP (P1500)   62 D

Disclaimer: This table has been correlated to assist you in material selection and only to be used as a reference and is believed to be accurate. Nothing contained here shall be construed as a recommendation to use any product or process in violation of the claims of any patent now in effect. Arptech services do not expressly or implicitly provide a warranty or approval of the intended materials selection or methods of fabrication of the prototype(s) or final part(s).